Power Meter Contholler

OPM150
OPM500
Related Power Sensor

Product Brochure:

OPM150_Console

Power Meter Console Comparison

Input	OPM 150	OPM 200	OPM 500
Detector Heads	Free Beam / Fibre Heads	Fibre Heads
USB Port	Yes	No	Yes
Output	Digital & Analogue	Analogue	Digital & Analogue
Power Range	nW - kW	µW - mW	pW - mW
Accuracy	± 4	± 5
Reproducibility	± 1	± 0.5
Linearity	± 0.2

The OPM150

is low cost, versatile and small enough to fit into your pocket, it is designed for use with a PC only, thus eliminating the need for a display making it very economical. It also has a response time of 100µs and sampling rates up to 600S/s with no thermal drift to worry about and customizable wavelength range.

Characteristics

-Interfaces: USB measurement rate: 30ms to 999s

-Minimum measurable power: 1nW (photodiode)

-Maximum measurable power: 5kW (Integrating sphere)

-Gain control: 5 gain ranges

-Functions: Graph and digital display modes, averaging

Applications

- Laboratory

- Laser Servicing

-OEMs

Item		OPM150 - 10kHz	OPM150 - 100kHz	OPM150 - 5Hz	Units
Order Code		30.070.00002	30.070.00058	30.070.0012
Application		CW and Pulse source >300kHz	CW	CW and Pulse source >500kHz
Input
Max. Current		12	4	12	mA
Output
Connectors		DB9 (detector head) and USB	DB9 (detector head) BNC and USB	DB9 (detector head) and USB
Bandwidth		10 000	100 000	5	Hz
Sampling Rate	GUI-Control	30	30	30	S/s
Sampling Rate	Direct polling	600	600	600
Gain Stages		1, 10, 100, 1000, 10000	1, 10, 100, 1000, 10000	1, 10, 100, 1000, 10000	V/mA
Accuracy	Detector	± 4	± 4	± 4	%
Accuracy	Base Unit	± 1	± 1	± 1	%
Reproducibility	Detector	± 1	± 1	± 1	%
Linearity	Detector	± 0.2	± 0.2	± 0.2	%
Power supply
Type		USB	USB	USB
Dimensions
	Base module	60 x 81 x 36 mm (W x L x H)	60 x 81 x 36 mm (W x L x H)	60 x 81 x 36 mm (W x L x H)	mm
	Head	35 x 30 (Φ x L)	35 x 30 (Φ x L)	35 x 30 (Φ x L)

Product Brochure:

OPM 200 Power Meter Console

The OPM200

employs high quality photodiodes and precision transimpedance input stages to provide for low offset and high linearity throughout the full dynamic range. It is particularly useful for the measurement of rapidly changing optical signals as this units have a particularly high bandwidth of 10MHz allowing monitoring of high frequency noise components of many light sources. The output is a voltage linearly proportional to input power. The fast response time at high signal-noise-ratio makes the OPM200 series particularly useful in systems control feedback loops. The OPM200 series is insensitive to electromagnetic interference by design, an important factor when working in “dirty” industrial environments.

Characteristics:

-Interfaces: DB9 (Analog Outputs)

Rise time: 35ns(10MHz)

-Noise equivalent power: 1µW (RMS)

-Gain control: none

Applications:

-industrial

-OEMS

Input
Wavelength range	UV-Si	200 – 950	800 – 1600	nm
	VIS-InGaAs	400 – 1600
	x2.0-InGaAs	500 – 2000
	x2.2-InGaAs	800 – 2200
Power ranges (full scale)		4.51	452	mW
Noise equivalent power (NEPRMS )		0.3 (max)	3 (max)	µW
Polarization Dependant Loss (PDL)		0.1	0.1	dB
Fibre Type		single mode, multi mode	single mode, multi mode
Fibre Type		(Ø core ≤ 62.5µm; NA ≤ 0.275)	(Ø core ≤ 62.5µm; NA ≤ 0.275)
Receptacles		FC, SMA, free beam	FC, SMA, free beam
Output
Function		Linear analogue : Vout = scale faktor x Iin	Linear analogue : Vout = scale faktor x Iin
Output scale		1	0.1	V/mW
Output range (full scale)		4.4 – 4.63		V
Connectors		BNC4 and DB9	BNC4 and DB9
Rise / Fall time (10% – 90%)		35 (max)	35 (max)	ns
Setting time (1%)		100 (max)	100 (max)	ns
Accuracy		± 5 (min)	± 5 (min)	%
Reproducibility		± 0.5 (min)	± 0.5 (min)	%
Linearity		± 0.1 (typ)	± 0.1 (typ)	dB
Linearity		± 0.2 (max)	± 0.2 (max)	dB
Output Impedance		50 (max)	50 (max)	Ω
Power supply
Type		wall plug (supplied)	wall plug (supplied)
Dimensions		30 x 50 x 60	30 x 50 x 60	mm
Dimensions
	1 channel	1055 x 45 x 116 (w x h x l)	1055 x 45 x 116 (w x h x l)	mm
	2 channels	1055 x 66 x 116 (w x h x l)	1055 x 66 x 116 (w x h x l)	mm
	4 channels	1055 x 106 x 116 (w x h x l)	1055 x 106 x 116 (w x h x l)	mm

Product Brochure:

OPM 500 Power Meter Console

The OPM500

is designed for the precise measurement of power, from pW to mW with the output being a voltage linearly proportional to the input power. The OPM500 is very flexible with USB and hard-wire interface control of gain, bandwidth, and polarity.

Characteristics

-Interfaces: USB and hard-wire (DB25)

-Rise time: 45µs

-Noise equivalent current: 30 PW(RMS)

-Gain bandwidth & polarity control: 6 gain ranges; 4 bandwidths; polarity inversion

-Auto-null function: up to 10V offset nulling

Applications

- Industrial

- OEMs

Input
Wavelength range	extended InGaAs	950 – 2100	800 – 1500	dBm
	InGaAs	800 – 1650		dBm
	visible enhanced InGaAs	400 – 1600		dBm
	UV-Si	190 – 950		dBm
Power ranges (full scale)		51	15	dBm
		0	10
		– 10	0
		– 20	– 10
		– 30	– 20
		– 40	– 30
Noise equivalent power (NEPRMS )	Range 1 – 5	full scale – 45 (max)	full scale – 32 (max)	dB
Noise equivalent power (NEPRMS )	Range 6	– 75 (max)	– 62 (max)	dBm
Polarization Dependant Loss (PDL)		0.02 – 0.1	0.02 – 0.1	dB
Fibre type		single mode, multi-mode	single mode, multi-mode (core Φ ≤ 62.5 μm; NA ≤ 0.275)
Fibre type		(Core Φ ≤ 62.5 μm; NA ≤ 0.275)	single mode, multi-mode (core Φ ≤ 62.5 μm; NA ≤ 0.275)
Receptacles		FC, SMA, free beam	FC, SMA, free beam
Output
Function		Linear analogue : Vout = scale factor x Pin	Linear analogue : Vout = scale factor x Pin
Output scale	Range 1	11	0,1	V/mW
	Range 2	10	1	V/mW
	Range 3	100	10	V/mW
	Range 4	1	0,1	V/µW
	Range 5	10	1	V/µW
	Range 6	100	10	V/µW
Output range (full scale)		10 (max)	10 (max)	V
Connectors		BNC and DB25 (Adapters for other connector systems available)	BNC and DB25 (Adapters for other connector systems available)
Rise / Fall time (10% – 90%)	Small signal (-1 → +1V)	45 (max)	45 (max)	µs
Rise / Fall time (10% – 90%)	Large signal (-10 → +10V)	65 (max)	65 (max)	µs
Accuracy		± 5 (min)	± 5 (min)	%
Reproducibility		± 0.5 (min)	± 0.5 (min)	%
Linearity		± 0.1 (typ)	± 0.1 (typ)	dB
Linearity		± 0.2 (max)	± 0.2 (max)	dB
Output impedance	BNC-Output	50	50	Ω
Output impedance	DB25-Output	0	0	Ω
Logic
Current required for switching		– 10 (min)	– 10 (min)	µA
		0.01 (typ)	0.01 (typ)
		10 (max)	10 (max)
Switching time		1502 (max)	1502 (max)	µs
Power supply
Type		Wall plug (supplied)	Wall plug (supplied)
Dimensions		30 x 50 x 60	30 x 50 x 60	mm
Dimensions
		1053 x 45 x 116 (B x H x L)	1053 x 45 x 116 (B x H x L)	mm

Choose the Power Sensor based on wavelength (Click Here)
SIMTRUM offers two types of sensor head Free beam and Fiber coupled, Wtih various diode materials allow measurement from 250nm to 2500nm. Silicon sensor wavelength range covers 250nm -110nm , Gemanium sensor wavelength range covers 800nm-1500nm, InGaAs sensor wavelength range covers 400-2500nm. The calibration file of each head is stored into its connector. Thus, changing wavelength range is as simple as swapping heads.

Optical Density Filter Choice
We offer caliberated attenuation filters which extend the range of free beam heads by up to three orders of magnitude. Power range cover from 1nW to 300mW

For High Power sensing combime sensor with integrating sphere. Click here
We offer integrating sphere which can extend your high power measurement from 2uW to 100W.With a response time tof 100us and sampling rates up to 600S/s, there is much more to see than with a thermopile sensor. And no thermal drift to worry about either!

4 products in total Add Contrast

Product Picture	Product Model	Drawings And Specifications	Operation
Product Picture：	Product Model：OPM 200 Power Meter Console Compatible with SI, InGaAs, Ge power detector, Only suitable for Fiber input power meter, only Analogue output, Power Range uW to mW	Drawings And Specifications：	Operation：inquiry
Product Picture：	Product Model：OPM 500 Power Meter Console Compatible with SI, InGaAs, Ge power detector, Only suitable for Fiber input power meter, Power Range pW to mW	Drawings And Specifications：	Operation：inquiry
Product Picture：	Product Model：OPM 150 Power Meter Console 4mA Max Current 4 mA Measurement bandwidth: 100kHz , Interfaces: USB, Compatible with full range power meter sensor	Drawings And Specifications：	Operation：inquiry
Product Picture：	Product Model：OPM 150 Power Meter Console 12mA Max Current 12 mA Measurement bandwidth: 10kHz , Interfaces: USB, Compatible with full range power meter sensor	Drawings And Specifications：	Operation：inquiry